Used HF tube mill 10” 273×9.3mm (A3799) for sale
Tube Mill 10” made in Taiwan
Ordered in 2010, Installed in 2012
Condition: Excellent (used) worked 5,000 hrs. only
This Tube Mill is designed for manufacturing steel pipes/tubes on one continuous line by High Frequency Welder.
Raw Material: Hot Rolled Carbon Steel Coil
Process:
Raw Material 🡪 Coil Skid 🡪 Coil Car (Electric Trolley) 🡪 Uncoiler 🡪 Hold Down Roller & Peeler 🡪
Pinch Roll & Leveller 🡪 Hoop End Jointing Equipment 🡪 Forming Mill 🡪 Welding Mill (with H.F. Welder)
🡪 Cooling Device 🡪 Sizing Mill 🡪 Flying Cut-Off Machine 🡪 Run-out Table 🡪 Slope-Side Buffer Table.
4) Pipe Size and Machine Main Spec.
a. Producible Pipe Size: O.D. Ø88.9mm (3”) – O.D. Ø273.1mm (10”)
b. Wall Thickness: 2.0mm – 9.3mm for round pipe
c. Mill Speed: Min. 8m/min – Max. 30m/min (for 6m pipe length)
d. Cutting Length: 5 -12 meters
e. Shaft: Drive – Ø130mm, Side – Ø80mm f.
Main Motor: AC 200 HP and AC 250 HP
g. Composition of line (Main Equipment)
1. Strip preparation Section
1) Coil Skid: 1 set
2) Coil Car: 1 set
3) Uncoiler: 1 set
4) Hold-down roll & Peller: 1 set
Press, Pinch roll, leveler
5) Hydraulic Unit: 1 set
2. Hoop End jointing equipment: 1 set
3. Forming section: 1 set
4. Welding section: 1 set
5. Cooling section: 1 set
6. Sizing & Turks Head section: 1 set
7. Driving & Controlling section: 1 set
8. Flying Saw Cut-off Machine: 1 set with Run-out table
9. Slope-side buffer table : 1 set
10. H.F. Welding equipment: 1 set
h. Line Speed
Ø114.3mm x 7.5mm (t) Round Pipe: Max. 17m/min Ø165.2mm x 7.0mm (t) Round Pipe: Max. 16m/min Ø216.3mm x 9.0mm (t) Round Pipe: Max. 10m/min
